How should the barbed wire be repaired and maintained?

June 20, 2023

Barbed wire further developed and expanded, there are a wide range of types such as: fence mesh, protective mesh, gilled mesh, woven mesh, hook mesh, Dutch mesh, welding mesh, steel welding mesh, wire welding mesh, wire gilled mesh, wire fence mesh; Mesh, etc., how to repair and maintain the wire mesh?

Double Fence Panel Welded Wire Mesh Safety Fence5

After many customers bought the barbed wire fence, after a year or two, due to the dust rippling on the road, the surface of the barbed wire fence is dirty and old for a long time.
The cleaning of the barbed wire fence should be based on the requirements of the surface treatment of the barbed wire fence, if the surface is galvanized, it is not recommended to clean with water, because the galvanized treatment infiltrates a layer of zinc into the wire, and the zinc layer will fall off in the wet place for a long time.
The main material of the barbed wire fence is made of low carbon steel wire welding, iron is oxide, rust will occur in the contact of water molecules in the air, and rusted iron will become fragile and loose for a long time.
At present, there are cold (electric) galvanizing, hot dip galvanizing, dipping, spraying, spraying, painting and other processes. Now it is mainly the use of cold galvanizing, hot galvanizing, spraying, dipping these four rust prevention processes.
The surface of the process is smooth, and the dust can be removed by using high-pressure water spraying method. Spraying and dipping in the processing of the working point will be treated, these working points plastic layer coverage is not uniform, customers pay more attention to the working point by painting maintenance.
Regular maintenance and cleaning strengthens the service life of the barbed wire fence and has the effect of improving the appearance. Maintenance is done with spray paint.
Once the zinc layer falls off, it loses its anti-rust effect. So manufacturers do not recommend the use of water cleaning. It can be cleaned by high pressure air blowing or vacuum cleaner. Pay more attention to the zinc layer falling off, if there is zinc layer falling off, spray some silver powder paint for maintenance.
If the surface is treated by dipping or spraying, it can be cleaned by high-pressure water spraying. Dipping or spraying is a plastic coating treatment, the main raw materials are polyvinyl chloride and polyethylene, which is to wrap a layer of plastic to the wire and block the oxidation of the chicken wire and the air.
Above is the barbed wire related matters, I hope to help you.

prossimo

Contal US

Autore:

Mr. William Wu

E-mail:

William@metal-fence.com

Phone/WhatsApp:

+8613383680511

Prodotti popolari

Potrebbe piacerti anche

Categorie correlate

Mail a questo fornitore