How to repair and maintain the barbed wire？

June 16, 2023

Barbed wire has further developed and grown, and there are many types such as: fence net, protective net, crimped wire mesh, woven wire mesh, chain link fence, Dutch mesh, welded wire mesh, welded steel mesh, welded wire mesh, wire crimped wire mesh, wire fence How to repair and maintain the barbed wire net; mesh, etc.
After many customers have purchased the barbed wire fence, one or two years later, due to the rippling dust on the road surface, the surface of the barbed wire fence will appear dirty and old after a long time.

The cleaning of the barbed wire fence depends on the surface treatment requirements of the barbed wire fence. If the surface is galvanized, it is not recommended to wash it with water, because the galvanized treatment penetrates a layer of zinc into the wire, and it will be damaged if it is used in a humid place for a long time. The zinc layer peeled off.

868 Double Fence Panel Welded Wire Mesh Safety Fence2

The main material of the barbed wire fence is welded with low-carbon steel wire. Iron is an oxide. It will rust when it comes into contact with water molecules in the air. After a long time of rusting, the iron will become fragile and loose.
At present, the surface antirust treatment methods of barbed wire fences include cold (electric) galvanizing, hot-dip galvanizing, dipping, spraying, spraying, baking paint and other processes. At present, the four major antirust processes of cold galvanizing, hot galvanizing, spraying and dipping are mainly used.
The surface of the process is smooth, and the dust on it can be removed by high-pressure water spraying. During the processing of plastic spraying and dipping, there will be treatment of working points. The plastic layer of these working points is not evenly covered. Customers should pay more attention to the maintenance of the working points through spray painting.
Regular maintenance and cleaning can enhance the service life of the barbed wire fence and improve the appearance. Self-painting is enough for maintenance.
Once the zinc layer falls off, it will not have the anti-rust effect. Therefore, the manufacturer does not recommend washing with water. It can be cleaned by high-pressure air blowing or vacuum cleaner. Pay more attention to the peeling of the zinc layer. If there is a phenomenon of peeling of the zinc layer, spray some silver powder paint for maintenance.
If the surface is treated by dipping or spraying, it can be cleaned by high-pressure water spraying. Plastic dipping or plastic spraying is a kind of plastic coating treatment. The main raw materials are polyvinyl chloride and polyethylene, which is to wrap a layer of plastic on the wire to block the oxidation of the wire mesh from the air.
The above is related to barbed wire, I hope it can be helpful to you.

prossimo

Contal US

Autore:

Mr. William Wu

E-mail:

William@metal-fence.com

Phone/WhatsApp:

+8613383680511

Prodotti popolari

Potrebbe piacerti anche

Categorie correlate

Mail a questo fornitore